Two modes: pick a nozzle (classic) or start from a target bead width (designer mode). Updates live.
Single-file • No dependencies • Responsive
Inputs
Classic mode
Designer modeWe recommend nozzle + layer height from your dataset.
Area always shown
Advanced inputs let you change the effective area factor (your sheet used 0.78) and rounding.
Recommended values still come from your dataset (or interpolation).
Using your dataset values (exact matches for 2, 4, 6, 9, 12, 15, 18, 21, 24 mm).
Dataset table
tap to expand
Nozzle (mm)
Area (mm²)
Eff @ factor (mm²)
Bead W×H (mm)
Ratio (w/h)
Recommended settings
Nozzle: 6.0 mm
Bead width (mm)
—
Line width / bead width
Layer height (mm)
—
Bead height / layer height
Ratio (w/h)
—
—
Nozzle area (mm²)
—
—
Visual (relative)—
W: —H: —
Tip: start with these values, then tune for material/temperature/flow stability. Keep the ratio close unless you have a reason to change it.